DAB 200NXTP Pro Single Stage Jet Assisted
DAB 200NXTP Pro Single Stage Jet Assisted Cast Iron Shallow Well Pressure Pump 808426
DAB pumps offer a large range of pumps suitable for pressure boosting, irrigation and wash down applications. Designed for pumping from tank, rivers and dams. These pumps are very reliable in the toughest of environments. The pumps are single stage jet assisted and constructed of cast iron. Capable of suction up to 8 meters.
Handy Hints for Installing Your Jet Pump
- Location: The pump should be located as close to the water source as possible and should be protected from the elements
- Piping: Only use pipe that is in good condition and free of rust or scale
- Types of Pipe: Plastic or galvanised steel can be used with jet pumps
- Water to Pump Piping: All offset piping should slope upwards from water source to pump.
Technical Specifications
| Brand | DAB Pumps |
| Product Type | Single Stage Jet Pump |
| Suitable For | Tank Transfer |
| Bar | 4.1 Bar |
| Flow Range Category | b. 100 – 199 L/min |
| Flow Rate (L/min) | 175 L/min |
| Hp | 2 Hp |
| kPa | 415 kPa |
| Kilo Watts | 1.47 kW |
| Casing Material | Cast Iron |
| Head Range Category | b. 40 – 59 m |
| Max Head (m) | 41 m |
| Port Size Inlet | 1 1/2″ BSPF inlet |
| Port Size Outlet | 1 1/4″ BSPF outlet |
| Powered | Electric |
| Volts | 240 V |
| Warranty (months) | 24 Months |
| Watts | 1470 W |
Controller
This pump includes the Bianco iCON nXt PRO series of pump controller.
The nXt PRO Controller is designed and tested in Australia to ensure operation in the toughest of environments, combining innovative technology with robust proven architecture to guarantee constant supply of pressurised water when and where you need it the most.
Controller Features
- Digital display gives you a real time indication of system pressure
- Anti-cycle Protection
- Dry run protection with auto restart function that tests for water availability every 24hrs
- Anti-seize function if pump has not operated for last 24 hours
- Controller automatically restarts pump after a power failure
- Easy assembly and removal using push-n-connect fitting with U clip
- Complies to AS/NZ 4020 drinking water standard
- Over pressure protection turns pump off when 10 bar is reached
- Overload protection
Controller Modes
Two operational modes:
- Mode One – Adjustable cut in pressure setting.
- Controller stops pump when flow drops.
- Mode Two – Adjustable cut in and cut out pressure.
- Shut down governed by pressure. Requires pressure tank.
Controller Flow Curve
| nXt PRO Controller Data | |
|---|---|
| Function | ON/OFF + Config |
| Modes | 2 |
| Size | 2.2Kw |
| Rated Voltage | 220-240V AC |
| Max Amps | 16 |
| Rated Power | 2200w |
| Rating | IP65 |
| Union Size | 1″ |
| Start Pressure | Adjustable |
| Stop Pressure | Adjustable |
| Max Pressure | 10 bar (145PSI) |
| Max Liquid Temp | 40°C |
| Cable to Pump | Plug and Play |
| Flylead for Pump | When sold as control only |
| Power Cable | 10AMP |
| Communication | – |
| Accessories (Sold Separately) | 15 AMP Cable |
| 1 ¼” Union Kit | |
| SKU | CHOOSE OPTIONS HERE: | Price | Availability | |
|---|---|---|---|---|
 | 808426 | DAB 200NxT Pro Jet Pump | $1,695.00 | Available |
| 808426 | DAB 200NxT Pro Jet Pump +18L Tank | $1,795.00 | Available |
| 808426 | DAB 200NxT Pro Jet Pump +24L-H Tank | $1,855.00 | Available |
| 808426 | DAB 200NxT Pro Jet Pump +60L Tank | $1,975.00 | Available |
| 808426 | DAB 200NxT Pro Jet Pump +100L Tank | $2,195.00 | Available |
Related Products
BIA-BPT-300 - Bianco Pressure Tank 300 Litre Vertical Almond 4 Bar Pre-Charge
A pressure tank is designed to enhance the efficiency of your pressure pumping system by storing a reserve of pressurised water. This allows the system to handle small water demands or minor leaks without constantly starting the pump, reducing frequent cycling. By minimising starts and stops, a pressure tank helps protect and extend the life of your pump while also lowering noise levels and unnecessary power consumption.
