Grundfos CMB 3-46 With Pressure Controller
CMB 3-46 A-C-A-A-B-A Pressure Pump 97530142
The Grundfos CM Booster with pressure manager PM1 is a compact booster set for water supply in domestic applications. The pressure booster unit consists of a Grundfos CM pump and a Grundfos pressure manager PM1. The pressure manager allows the pump to start and stop automatically according to demand and protects the pump from dry running. The CM Booster is very easy to install. When the booster has been connected to the pipework, it is all a matter of plugging the plug into a socket, and the system is operational.
Features
- Compact
- Easy installation
- Dry-running protection
- Anti cycling (leakage detection)
Applications Grundfos CM PM1 Booster is mainly used for domestic and light commercial water supply or booster systems.
NB:
Suction lift: Max. 1 m, including suction-pipe pressure loss at a liquid temperature of 20 °C. (not self-priming)
Motor / power: 500W
Max. flow: 70LT/min
Head: 46m
Inlet: 1″F / 25mm
Outlet: 1″M / 25mm
Pressure: 370kPa
Body: 304 Stainless Steel
Diffuser: Technopolymer
Impeller:304 Stainless Steel
Pump Shaft: 304 Stainless Steel
Mechanical Seal : Carbon with resin/ceramic
Start pressure: PM1 – 2.2 bar
Components: – Non self-priming stainless steel pump with PM1 – Cable 1.2 m with plug
Liquid temperature: 0°C to +60°C
Ambient temperature: 0°C to +55°C
Supply voltage: 1 x 240 Volt 50 Hz
System pressure: Maximum 10 bar
Enclosure class: Suitable for covered installation (IP55)
Warranty on pump: 2 Years
Code: 97530142
The table below gives a brief overview of the features of the PM 1:





Related Products
Aussie Pumps - QP154SX Ultralite Fire Pump - Petrol
The 1.5″ QP154SX Ultralite Fire Pump is ideal for those who need a light, portable fire pump able to transfer high volumes of water at relatively low pressures. Can be used to for emergency floods, irrigation, construction sites, and tanker applications.
Aussie Pumps 1″ QP1 Ultralite
This compact fire pump runs on a genuine Honda GX25 1HP petrol engine. It delivers 120L/min open flow and has a 5 year pump end warranty. The pump is lightweight, easy to carry, and starts with a simple pull. Built with strong seals and a marine grade aluminium impeller, it’s tough and reliable.
Aussie Pumps – Fire Chief QP205SE - Petrol
The Aussie Fire Chief, with its skid and handle, is a standout in the Aussie Pumps collection. It has an impressive 75 meter head and can pump 450 liters of water per minute. The large belly body lets a lot of water flow through the pump, boosting its performance significantly. This pump is designed to perform exceptionally well in different situations.
Aussie Pumps Fire Captain QP205SL Honda GX200 - Petrol
The Honda GX200 Fire Fighting Pump features a heavy duty marine grade aluminum body, a large single piece impeller for high performance, and a three way outlet for flexible operations. The compact and durable design ensures ease of use and portability, making it an excellent tool for tough environments.



